 |
 |
 |
|
Features include Fleck 2850 timer valves with 1600 or 1700 brining, PVC injectors, environmental backplates and covers, commercial distributors, Manganese GreensandPlus, gravel bed and commercial potassium solution tank.
Product Features:
- Fully adjustable 5-cycle control delivers controlled up-flow backwash, down-flow brining and slow rinse, rapid rinse, timed brine refill and down-flow service
- Time-tested hydraulically balanced piston, seal and spacer design to pilot service flow and regeneration
- Solid lead-free brass valve body for superior strength and durability
- Backwash capacity handles tanks up to 30" diameter
- 1-1/2" top mount control valve ideal for smaller size commercial/industrial applications
- Consistent brining regardless of salt levels with timed brine refills
- Choice of 7 or 12 day clock, manual or meter
- Continuous flow rate of 51 GPM with a backwash of 49 GPM
- Ideal for filter applications
Manganese GreensandPlus (for Iron Removal)
The silica sand core of GreensandPlus allows it to better withstand operating conditions in waters that are low in silica, TDS and hardness. Thus, if you currently are using manganese greensand and are feeding sodium aluminate, you will likely be able to eliminate the aluminate feed by switching to GreensandPlus. Also, GreensandPlus can withstand higher operating temperatures and higher differential pressures than can manganese greensand. The higher differential pressure may allow for a longer run length, but, if nothing else, allows for more operational margin of error.
GreensandPlus™ is a purple-gray filter media used for removing soluble iron, manganese, hydrogen sulfide, arsenic and radium from well water supplies.
Like its sister product manganese greensand, the substrate media has a manganese dioxide coated surface that acts as a catalyst in the oxidation- reduction reaction of iron and manganese. The difference between GreensandPlus™ and Manganese Greensand is in the substrate that forms the core of the media and the method by which the manganese dioxide coating is attached to that substrate. GreensandPlus™ has a silica sand core and the coating is fused to it while Manganese Greensand has a glauconite core and the coating is ionically bound to it.
The silica sand core of GreensandPlus™ allows it to better withstand operating conditions in waters that are low in silica, TDS and hardness. Thus, if you currently are using manganese greensand and are feeding sodium aluminate, you will likely be able to eliminate the aluminate feed by switching to GreensandPlus™. Also, GreensandPlus™ can withstand higher operating temperatures and higher differential pressures than can manganese greensand. The higher differential pressure may allow for a longer run length, but, if nothing else, allows for more operational margin of error.
Along with the added benefits comes the fact that GreensandPlus™ is an exact replacement for manganese greensand. It can be used in CR and IR applications and requires no changes in backwash rate or times or chemical feeds. GreensandPlus™ has received the WQA Gold Seal Certification for compliance with NSF/ANSI 61.
Capacity/Cu. Ft.:
Iron Alone: 550 gr. (10,000 gal. of water containing 1 ppm iron/cu. ft.)
Iron and Manganese: 400 gr. (7,000 gal. of water containing 1/2 ppm iron and 1/2 ppm manganese/ cu. ft.)
Hydrogen Sulfide: 175 gr. (3,000 gal. of water containing 1 ppm hydrogen sulfide. cu. ft.)
Advantages:
- Iron removal over wide pH range
- Effective removal of hydrogen sulfide in addition to iron and/or manganese
- No harmful effects from a chlorine feed
- Low attrition loss for long bed life
Physical Properties:
Color: Black nodular granules
Density: 85 lbs./cu. ft.
Effective Size: 0.30 - 0.35 mm
Uniformity Coefficient: 1.6
Mesh Size: 18 X 60
Attrition Loss Per Year: 2%
Conditions for Operation:
Raw Water pH: 6.2 - 8.5
Bed Depth: 30 in.
Freeboard: 35 - 50%
Service Flow Rate: 2 – 12 gpm/sq. ft. (5-12 m/hr)
Backwash Flow Rate: 12 gpm/sq. ft. at 55ºF (30 m/hr at 13ºC)
Maximum Temperature: No Limit
Maximum Practical Limit of Iron (Fe++) or Manganese (Mn++) In Raw Water: 15 ppm.
Maximum Practical Limit of Hydrogen Sulfide (H2S): 5 ppm.
Fleck 2850 Control Valve Tear Down
|
|
|
 |
|
 |
|