• Permeate flow: 2,000 gpd
• CaCl2 rejection: 90%
• CaCl2 rejection (minimum/maximum): 85%/95%
• Optimum hardness rejection
• Effectively removes organics
• Ultra-low pressure, energy saving, lower OPEX

• Municipal water treatment

• Permeate Flow: 2,000 gpd (7.6m3/d)
• CaCl2 Rejection: 90%
• CaCl2 Rejection (minimum/maximum): 85% / 95%

Maximum Applied Pressure	600 psig (4.14 MPa)
Maximum Chlorine Concentration	< 0.1 PPM
Maximum Operating Temperature	113 °F (45 °C)
pH Range, Continuous (Cleaning)	2-10 (2-12)*
Maximum Feedwater Turbidity	1.0 NTU
Maximum Feedwater SDI (15 mins)	5.0
Maximum Feed Flow	16 GPM (3.6 m3 /h)
Minimum Ratio of Concentrate to Permeate Flow for any Element	5:1
Maximum Pressure Drop for Each Element	15 PSI

* The limitations shown here are for general use. For specific projects, operating at more conservative values may ensure the best performance and longest life of the membrane. See Hydranautics Technical Bulletins for more detail on operation limits, cleaning pH, and cleaning temperatures