Home > Water Pumps > FEDCO >

FEDCO MSS-200 Multistage Centrifugal High Pressure Feed Pump
FEDCO MSS-200 Multistage Centrifugal High Pressure Feed Pump
 
Alternative Views:
Please contact us for pricing.

Please contact ForeverPure for Pricing. (Call 408-969-2688 ext. 1 for Sales Department)



Availability:: Usually Ships in 3 to 5 Business Days
Product Code: MSS-200
Qty:

Description Spec Sheet / Manual Technical Specifications
 
FEDCO MSS Series Multistage Centrifugal High Pressure Feed Pumps
Multistage centrifugal high-pressure feed pumps that provide a new level of reliability and efficiency in seawater reverse osmosis pumps

  • 7.5 – 295 m3/h (33 – 1300 gpm)
  • Pressures to 83 bar (1200 psi)
  • Duplex SS Pressure Containment
  • Impeller and Diffuser are 316 SS – electropolished & passivated

MSS pumps are multistage centrifugal feed pumps specifically designed for brackish and seawater reverse osmosis service, representing the most reliable high-pressure feed pump available today.

Loaded with unique features such as the patented Water Bearing™ thrust bearing, product-lubricated shaft bearings, and maintenance-free design, the MSS ensures years of trouble-free operation. The MSS also features one of the longest warranties in the industry – a full 18 months of coverage from the date of product installation

  1. Shaft seal operates at low pressure
  2. Flexible disc coupling
  3. Bearing drain line (low pressure)
  4. 316 SS shell support bracket
  5. Precision leveling foot
  6. Grooved end pipe joints
  7. Duplex SS 2205 housing
  8. Flanged construction for easy internal inspection
  9. Inlet rotatable in 90° increments
  10. Easy shaft alignment
  11. Integrated motor adapter (anodized aluminum alloy)
  12. 316L SS stages – passivated & electropolished – proven in hundreds of SWRO applications
  13. WATER BEARING™




High Inlet Pressure Option


All MSS pumps can be equipped with high inlet pressure option to allow inlet pressure to 70 bar. This unique design features:
  • Use of low-cost, standard mechanical seals, operating at a low pressure (typically 1-2 bars)
  • Total protection of the motor from pump thrust loads – a major problem with high inlet pressure operation
  • Pump shaft kept in tension – no potential for shaft buckling
  • Handles total axial thrust – no load on motor bearings
  • Never needs lubrication
  • Bearing cooled by feed water – no ambient temperature limit
  • 316L SS stages, passivated and electropolished

MSS-200 OPERATING PARAMETERS

LiquidSeawater, brackish water, and fresh water
Operating Temperature0.6 - 70.0°C
Maximum Storage Temperature85°C
Pump Operating Flow Range*100-250 m3/h
Maximum Pressure83 bar
Filtration Requirement20 microns

*Range may vary.

Share your knowledge of this product. Be the first to write a review »