IRONRIDGE FlashFoot2
FM-FF2-001
Flashing for Comp Shingle roofs Flashfoot Kit with Bonding L-foot, Mill
Box of 4 flashings
FlashFoot2 is an all-in-one roof attachment for mounting XR Rails to composition shingle roofs. Its integrated design incorporates both structural and waterproofing features into a single assembly. This eliminates the need for separate standoffs, flashings, and L-feet, and reduces the overall number of installation procedures.
FLASHFOOT2 FEATURES
Twist-On Cap
FlashFoot2’s unique Cap design encapsulates the lag bolt and locks into place with a simple twist. The Cap helps FlashFoot2 deliver superior structural strength, by aligning the rail and lag bolt in a concentric load path.
Single Socket Size
A custom-design lag bolt allows you to install FlashFoot2 with the same 7/16” socket size used on other Flush Mount System components.
Water-Shedding Design
FlashFoot2's elevated platform diverts water away from the water seal.
Three-Tier Water Seal
FlashFoot2’s seal architecture utilizes three layers of protection. An elevated platform diverts water away, while a stack of rugged components raises the seal an entire inch. The seal is then fully-encapuslated by the Cap. FlashFoot2 is the first solar attachment to pass the TAS-100 Wind-Driven Rain Test.