FilmTec™ TW30-2521

FilmTec™ TW30-2521 Elements produce high quality water for small commercial systems. FilmTec TW30-2521 elements are tape-wrapped. In addition to high quality water and low energy costs, FilmTec membranes also deliver savings by providing long lasting and reliable performance.

FilmTec™ Brackish Water Reverse Osmosis < 4" Elements can separate salts from water and are produced with an automated fabrication process for precision, consistency, and reliability. They are ideal for use in small-sized water treatment systems that produce less than approximately 1 gpm (230 L/h) of permeate. Our RO membranes build on a tradition of leadership in the thin-film composite membrane industry and meet the challenges of higher rejection in lower-pressure operations.


Uses

• Commercial water treatment systems

• Food service
• Medical and research institutions
• Hospitality industry

• High flux results in high yields

• High rejection provides good water quality

• Permeate Flow Rate gpd (m3/d): 325 (1.23)

• Stabilized Salt Rejection %: 99.5
• Maximum Feed Flow Rate, gpm (m3/h): 6 (1.4)

b. Refer to Cleaning Guidelines in specification sheet 609-23010.
c. Under certain conditions, the presence of free chlorine and other oxidizing agents will cause premature membrane failure. Since oxidation damage is not covered under warranty, it is recommended that residual free chlorine be removed by pretreatment prior to membrane exposure. Please refer to technical bulletin 609-22010 for more information

We are a volume seller of FilmTec and Hydranautics membranes. Please contact use for large quantity discounts.