Home > Membranes - RO/UF/NF > Hydranautics >

Hydranautics ESPA-4641 Reverse Osmosis Membrane Element
Hydranautics ESPA-4641 Reverse Osmosis Membrane Element
 

Please contact ForeverPure for Pricing. (Call 408-969-2688 ext. 1 for Sales Department)




Availability:: Usually ships in 2-3 business days.
Product Code: ESPA-4641
Qty:

Description Spec Sheet / Manual Technical Specifications
 
Hydranautics ESPA-4641 Reverse Osmosis Membrane Element

(Suggested alternative: Filmtec TW30HP-4641)


ESPA® (Energy Saving Polyamide) elements achieve high flux/lower pressure without compromising standards for high rejection. Since its introduction in the late 1990s, the ESPA® membrane has gained wide acceptance in the water treatment industry due to the significant operational cost savings associated with their use.

Advantages
  • Salt rejection: 99.4 % (98.0% minimum)
  • Lower pressure for lower CAPEX/OPEX

Applications

  • Municipal potable and wastewater plants
  • Bottling operations
  • Light industrial

Performance
  • Permeate Flow: 3600 gpd (13.6 m3/d)
  • Salt Rejection: 99.4 % (97.5% minimum)

Type
  • Configuration: Spiral Wound
  • Membrane Polymer: Composite Polyamide
  • Membrane Active Area: 120 ft2

Application Data

Maximum Applied Pressure300 psig (2.1 MPa)
Maximum Chlorine Concentration< 0.1 PPM
Maximum Operating Temperature113 °F (45 °C)
pH Range, Continuous (Cleaning)3.0 - 10.0*
Maximum Feedwater Turbidity1.0 NTU
Maximum Feedwater SDI (15 mins)4.0
Maximum Feed Flow18 GPM (3.0 m3 /h)
Minimum Ratio of Concentrate to Permeate Flow for any Element5:1
Maximum Pressure Drop for Each Element10 PSI

* The limitations shown here are for general use. For specific projects, operating at more conservative values may ensure the best performance and longest life of the membrane. See Hydranautics Technical Bulletins for more detail on operation limits, cleaning pH, and cleaning temperatures


Share your knowledge of this product. Be the first to write a review »