Home > Water Treatment Chemicals > Chemicals > Membrane / softener Chemicals >

King Lee Memstor?�� for Membrane Storage, 45 lbs
King Lee Memstor?äó for Membrane Storage, 45 lbs
Memstor-45lb
  
Alternative Views:
Call for pricing

Please contact ForeverPure for Pricing. (Call 408-969-2688 ext. 1 for Sales Department)



Availability:: Usually Ships in 2 to 3 Business Days
Product Code: MEMSTOR-45LB
Qty:

Description Spec Sheet / Manual Technical Specifications
 
King Lee Memstorâ„¢ for Membrane Storage

Highly effective short and long term membrane storage product to inhibit microbiological growth within membranes and membrane systems.

Available Sizes

  • 4 lbs (1.8 kg)
  • 25 lbs (11.3 kg)
  • 45 lbs (20.4 kg)

Features

  • Formulated specifically to prevent microbiological growth within membrane elements and systems during storage.
  • Eliminates the need for formaldehyde, sodium metabisulfite and other chemicals that are either hazardous or unstable.
  • Non-toxic and environmentally friendly.
  • Powder formulation for ease of transportation and storage.
  • NSF/ANSI 60

Application

On-line Storage 1. Clean the membrane with King Lee cleaners prior to storage. 2. Mix at a ratio of one pound Memstorâ„¢ to 6 gallons of DI or permeate water. 3. Recirculate storage solution at low pressure (<60 psig) through the membranes for a minimum of 15 minutes. 4. After re-circulation, shut the system down. Ensure storage solution does not drain out of membranes. 5. After storage, rinse membranes with DI or permeate water for 30 minutes before system start-up. Container Storage 1. Clean membranes with King Lee cleaners. 2. Mix at a ratio of one pound Memstorâ„¢ to 6 gallons of DI or permeate water. Place membranes in storage container filled with Memstorâ„¢ solution. 3. After storage, place membranes in system and rinse with DI or permeate water for 30 minutes prior to system start-up.

Dilution Ratio

Mix at a ratio of one pound Memstorâ„¢ to 6 gallons of DI or permeate water.

Specs
  • Appearance: White to Off-White Powder
  • Product pH (1%): 4.3 ± 2.0

Share your knowledge of this product. Be the first to write a review »