Home > Myron L Meters and Sensors >

Myron L CS10LS 6 Inch Resistivity Sensor
Myron L CS10LS 6 Inch Resistivity Sensor
 

Please contact ForeverPure for Pricing. (Call 408-969-2688 ext. 1 for Sales Department)



Product Code: CS10LS


T: 		Titanium electrode body (replaces stainless steel electrode body) [Add $70.50]

25 ft Cable: 		Extend sensor cable length to 25ft [Add $30.50]

100 ft Cable: 		Extend sensor cable length to 100ft [Add $108.00]

PV: 		1/2" PVDF fitting (replaces standard 3/4" polypropylene fitting) [Add $51.00]

HPSS: 		1/2" High pressure stainless steel fitting (replaces standard 3/4" polypropylene fitting) [Add $132.50]

SQC: 		Quick Connect sensor cable M/F [Add $70.50]

Qty:
Description Spec Sheet / Manual Technical Specifications
 
CS10LS sensors (0.05 constant) are used for Resistivity ranges. All 750 Series II Resistivity models require a CS10 series sensor. This reliable sensor features two integral thermistors to ensure accurate and rapid automatic temperature compensation. The sturdy polypropylene standard bushing is modular for easy, inexpensive replacement. A PVDF or 316 stainless steel bushing can also be ordered. The metal portion is available in either 316 stainless steel (standard) or titanium.

INCLUDES
• Sensor with 10ft cable
• 3/4" MNPT bushing fitting (standard)

BENEFITS
• Economic Value
• Small, Convenient Size
• 100 psi at 100°C
• General Purpose Use
• Field Replaceable

DESCRIPTION
Wetted materials of construction are 316 stainless steel and Teflon®*, with double O-ring seals at all points. The first EPR O-ring bears the brunt of process interface, allowing the second O-ring to maintain reliable sealing, free from chemical attack. An integral temperature element allows automatic compensation for maximum accuracy. Leads are 10 ft./3 meters standard. Process connections are made via a bored through swage 3/4” NPT fitting as standard. This fitting may be installed into a line or tank, or may be reversed and connected to a standpipe for use in a submersion configuration. The CS10 was designed primarily for use in pure water applications.

Share your knowledge of this product. Be the first to write a review »